Improving the Finishing Efficiency of Coarse-Grained Gear Wheels

Purpose of research. Improving the finishing performance of coarse-grained gear wheels on software-controlled machines.

Methods.  The method of discrete copying, the theory of designing cutting tools, methods of mathematical and computer programming.

Results. It is an urgent task to improve the performance of fine milling of coarse-grained gear wheels by using the capabilities of modern software-controlled equipment. Here we consider the issues of improving the finishing performance of coarse-grained gear wheels on software-controlled machines of hyperboloid mills equipped with interchangeable polyhedral plates (IPP) with a straight cutting edge located at an angle λ to the instrument axis of rotation. It is proposed a method for controlling the accuracy of shaping surfaces, generatrix of which forms a section (set of sections) of convex curves by installing a cutting tool relative to the evolvent profile (fourth axis of the machine) and relative to the feed direction (fifth axis of the machine). The authors have developed a discrete copying method with a set of hyperboloid cutters of tooth surface of coarse-grained gear wheels. It allows us to ensure the 6th degree of accuracy in the parameter of the tooth profile error.

Conclusion. The results of the study improve the finishing performance treatment of the teeth of coarse-grained gear wheels on software-controlled machines by reducing the number of passes required for machining one side of the tooth in comparison with the methods of continuous rolling and high-speed end milling. The proposed designs of cutting tools have sufficient versatility to handle a wide range of coarse-grained gear wheels, which is important in the repair and small-scale production.

coarse-grained gear wheels, hyperboloid mills, processing accuracy, molding methods

1. Оtt О.S. Sbornye diskovye zuboreznye frezy i protsess mekhanicheskoi obrabotki krupnomodul'nykh zubchatykh koles na stankakh s ChPU [Teams disc gear cutter and the machining process of coarse-grained gear wheels on CNC machines]. Izvestiya Moskovskogo gosudarstvennogo tekhnicheskogo universiteta MAMI = Proceedings of Moscow state technical University MAMI, 2011, no. 1 (11), pp. 174-177 (In Russ.).

2. Basova Е.V., Dobrotvorskii S.S. Kinematika formoobrazovaniya evol'ventnoi i trokhoidal'noi poverkhnostei pri vysokoskorostnom kontsevom frezerovanii [Kinematics of formation of involute and trochoidal surfaces at high-speed end milling]. Novі materіali і tekhnologії v metalurgії ta mashinobuduvannі, 2011, no. 2, pp.132-137 (In Russ.).

3. Emelianov S.G., Chevychelov S.A., Chistyakov P.P. Razrabotka SAPR giperbolo-idnykh frez dlya obrabotki evol'ventnykh profilei [The development of CAD hyperboloid of milling cutters for machining of involute profiles]. Spravochnik. Inzhenernyi zhurnal s prilozheniem = The Directory. Engineering journal with the app, 2014, no. 4 (205), pp. 42-46 (In Russ.).

4. Emelianov S.G., Chevychelov S.A., Chistyakov P.P., Chevychelov I.N. Optimization of parameters for hyperbolic railhead profile // Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. Tomsk, 2015. С. 1-4.

5. Emelianov S.G., Chevychelov S.A., Bobryshev D.A. The dimensional analysis at modular tool design. Modern materials and technologies, 2009, no. 1, pp. 219-224.

6. Emelianov S.G., Chevychelov S.A., Chistyakov P.P. Skhemy formoobrazovaniya gi-perboloidnymi instrumentami [Schemes of formation of hyperboloid instruments]. Izvestiya Tul'skogo gosudarstvennogo universiteta. Tekhnicheskie nauki = Proceedings of Tula state University. Technical science, 2017, no. 8-1, pp. 133-140 (In Russ.).

7. Chevychelov S.A., Gladishkin А.О. Opredelenie parametrov proizvodyashchei po-verkhnosti giperboloidnykh frez [Determination of the parameters of the producing surface of hyperboloid mills]. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii = Proceedings of Southwest State University. Series: Engineerin-gandtechnology, 2012, no. 2-3, pp. 113-115 (In Russ.).

8. Chevychelov S.A., Chevychelov I.N. Osobennosti proektirovaniya giperboloidnykh instrumentov [Design features of hyperboloid tools]. Sovremennye materialy, tekhnika i tekhnologii = Modern materials, engineering and technology, 2015, no. 3 (3), pp. 260-264.

9. Chevychelov S.A., Chistyakov P.P., Oleksjuk V.S. Povyshenie proizvoditel'nosti obrabotki zubchatykh koles [Increase of productivity of gears processing]. Aktual'nye prob-lemy v mashinostroenii = Actual problems in mechanical engineering, 2015, no. 2, pp. 148-151 (In Russ.).

10. Emelianov S.G., Chevychelov S.A. Povyshenie kachestva obrabotannoi poverkhnosti putem vybora ratsional'noi skhemy formoobrazovaniya [Improving the quality of the treated surface by choosing a rational scheme of shaping]. Problemy mashinostroeniya i avtomatizatsii = Problems of engineering and automation, 2004, no. 3, pp. 86-88 (In Russ.).

11. Chevychelov S.A. Opredelenie parametrov giperbolicheskogo profilya golovki rel'sov [Determination of the parameters of the hyperbolic profile of the rail head]. Izvestiya Kurskogo gosudarstvennogo tekhnicheskogo universiteta = Proceedings of the Kursk state technical University, 2010, no. 4 (33), pp. 72-75 (In Russ.).

12. Emelianov S.G., Chevychelov S.A. Metodika proektirovaniya giperbolicheskikh frez dlya reprofilirovaniya starogodnykh rel'sov [Methods of designing hyperbolic mills for reprofiling old-fashioned rails]. Izvestiya Tul'skogo gosudarstvennogo universiteta. Seriya: Tekhnologicheskaya sistemotekhnika = Proceedings of the Tula State University. Series: Process system sengineering, 2005, no. 4, pp. 32-35 (In Russ.).

13. Emelianov S.G., Chevychelov S.A., Bobryshev D.A. Vliyanie nachal'nogo radiusa sbornykh giperbolicheskikh frez na parametry tochnosti korpusa instrumenta [Influence of the initial radius of precast hyperbolic cutters on the accuracy parameters of the tool body]. Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty) = Metal Processing (tech-nology, equipment, tools), 2011, no. 2 (51), pp. 27-29 (In Russ.).

14. Emelianov S.G., Chevychelov S.A. Analiz vliyaniya nachal'nogo radiusa giperboli-cheskoi frezy na ee vykhodnye parametry [Analysis of the influence of the initial radius of the hyperbolic mill on its output parameters]. Izvestiya Orlovskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: Mashinostroenie. Priborostroenie = Izvestiya Orel State Technical University. Series: Mechanical Engineering. Instrument making, 2006, no. 2, pp. 36-41 (In Russ.).

15. Emelianov S.G., Chevychelov S.A., Bobryshev D.A. Vliyanie ugla povorota sbornykh giperbolicheskikh frez otnositel'no osi simmetrii rel'sa na parametry tochnosti korpusa instrumenta [The influence of the angle of rotation of hyperbolic milling cutters with respect to the axis of symmetry of the rail on the accuracy parameters of the tool body]. Fundamental'nye i prikladnye problemy tekhniki i tekhnologii = Fundamental and applied problems of engineering and technology, 2011, no. 3-4 (287), pp. 9 (In Russ.).

16. Emelianov S.G., Chevychelov S.A. Analiz vliyaniya nachal'nykh dannykh na vykhodnye parametry protsessa proektirovaniya giperbolicheskikh frez [Analysis of the in-fluence of initial data on the output parameters of the design process of hyperbolic mills]. Izvestiya Tul'skogo gosudarstvennogo universiteta. Seriya: Tekhnologiya mashinostroeniya. News of Tula state University. Series: Mechanical engineering technology, 2006, pp. 138-140 (In Russ.).

17. Emelianov S.G., Chevychelov S.A., Bobryshev D.A. Vliyanie ugla povorota sbornykh giperbolicheskikh frez otnositel'no osi simmetrii rel'sa na parametry tochnosti korpusa instrumenta [The influence of the angle of rotation of hyperbolic milling cutters with respect to the axis of symmetry of the rail on the accuracy parameters of the tool body]. Fundamental'nye i prikladnye problemy tekhniki i tekhnologii = Fundamental and applied problems of engineering and technology, 2011, no. 4-3 (288), pp. 9-13 (In Russ.).

18. Emelianov S.G., Chevychelov S.A., Chistyakov P.P. A method of processing of in-volute profiles of large-module gear wheels. Applied Mechanics and Materials, 2014, vol. 698, pp. 546-551.

19. Chevychelov S.A. Optimizatsiya parametrov giperboloidnykh frez [Optimization of the parameters of the hyperboloid cutters]. Izvestiya Yugo-Zapadnogo gosudarstvennogo universiteta. Seriya: Tekhnika i tekhnologii = Proceedings of the Southwest State University, Series: Engineering and Technologies. 2012, no. 2-1, pp. 98-100 (In Russ.).

20. Emelianov S.G., Chevychelov S.A. Errors of profile formed by hyperbolic mills. Russian Engineering Research, 2008, vol. 28, no. 1, pp. 31-34.