RECONSTRUCTION OF INFRASTRUCTURE LLC "AVTOMIR"

The need for the reconstruction of existing auto service enterprises is caused by changes in the structure of the rolling stock, the design of cars and the conditions of their operation, increasing the requirements for the quality of rolling stock, the design of cars and their operating conditions, increasing the quality requirements for maintenance and repair, saving fuel and energy resources and quality assurance of the environment. In our case, the need to reconstruct the autoservice company LLC "Avtomir" is associated with the need to switch to maintenance and storage of new types of rolling stock, as well as changes in the dynamics of demand for cars. In LLC Avtomir there is no possibility of rendering services related to damage to the body of the car, which reduces the ability of the organization to receive additional income, as this type of damage owners of vehicles have to eliminate at other service stations. This fact puts the company in front of the need to create a paint and body shop in the future. The purpose of this work was the development of measures to reconstruct the infrasructure of LLC "Avtomir". The main results of the technological calculation of the enterprise are as follows: - the annual workload of the technical service station is 43529 man-hour; - annual scope of works of washing, maintenance, lubrication, adjusting for setting the angles of the front wheels, adjusting brakes, maintenance and repair of the power system, electrical, tire fitting 4913; 15235.2; 2176.5; 2611.7; 3917.6; 4353; 4353; 2285 and 914 man-hour respectively; - the annual volume of works at the tire fitting site, on the maintenance and repair site of the power supply system, electrical, maintenance units is 2133; 762; 4788.2 man-hour respectively; - necessary number of production workers for maintenance and technical maintenance 29 (technological) and 35 (staff), as well as the number of auxiliary 4 and engineering - technical 5 workers; - the necessary number of posts for washing, maintenance, lubricants, technical maintenance, adjusting for setting the angles of the front wheels, adjusting for the brakes, maintenance and repair of the power system, electrical 4; 1; 1; 1; 1; 1 and 1 respectively. Analysis of production and economic activities of the enterprise allowed us to identify the objectives of the enterprise, the dynamics of its development, the state of the production and technical base. This makes it possible to identify the main shortcomings in the functioning of the organization and to implement the formulation of new tasks that need to be solved in the future. Namely, LLC "Avtomir" needs to increase production capacity, namely the addition of a diagnostic post and one more car acceptance post. In addition, there is a need to implement the washing zone, and on the vacated area to arrange a painting and drying chamber and a preparation site for painting works.

автосервисное предприятие, производственно-техническая база, реконструкция, autoservice enterprise, infrastracture, reconstruction

1. Передерий В.Г., Гасанов Б.Г., Напхоненко Н.В. Экономика автотранспортного предприятия. Новочеркасск: Изд-во НПИ, 2009. 114 с.

2. Епишкин В.Е. Перспективные на-правления развития предприятий автосервиса // Азимут научных исследований: экономика и управление. 2017. Т. 6. № 3 (20). С. 145-148.

3. Тахтамышев Х.М. Оптимизация мощности автосервисных предприятий при различных формах организации труда // Известия Волгоградского государственного технического университета. Серия: Наземные транспортные системы. 2014. Т. 9, № 19 (146). С. 70-73.

4. Кузнецов Е.С. Техническая эксплуатация автомобилей. М.: Наука, 2004. 535 с.

5. Напольский Г.М., Солнцев А.А. Технологический расчёт и планировка станций обслуживания автомобилей. М.: МАДИ, 2003. 53 с.

6. Марков О.Д. Автосервис: Рынок, автомобиль, клиент. М.: Транспорт, 1999. 270 с.

7. Дамшен К. Ремонт автомобильных кузовов. М.: Изд-во «За рулем», 2007. 240 с.

8. Агеев Е.В. Теоретические и нормативные основы технической эксплуатации автомобилей. Курск, 2008. 195 с.

9. Агеев Е.В. Технология технического обслуживания и ремонта автомобилей. Курск, 2008. 216 с.

10. Агеев Е.В. Управление производством и материально-техническое обеспечение на автомобильном транспорте: учебное пособие. Курск, 2008, 174 с.

11. Агеев Е.В. Особые условия технической эксплуатации и экологическая безопасность автомобилей. Курск, 2008. 212 с.

12. Емельянов С.Г., Емельянов И.П., Воронцов С.В. Технология ремонта турбокомпрессоров в условиях центра перспективных технологий // Известия Юго-Западного государственного университета. Серия: Техника и технологии. 2014. № 1. С. 38-44.

13. Агеева Е.В., Агеев Е.В., Воскобойников Д.В. Использование игровых методов при определении запасных частей на складах автосервисных предприятий // Современные автомобильные материалы и технологии: сб. ст. VI Междунар. науч.-техн. конф. Курск, 2014. С. 16-23.

14. Агеев Е.В., Агеева Е.В. Теоретические аспекты технической эксплуатации автомобилей: монография. Курск, 2013. 154 с.